Washing dishes | en |
Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence, duration and consumption details are shown in the right half of the overview. For example:
Use the “Normal” 
programme for dishes and utensils which have plenty of food remains stuck on hard.
Earn savings
If only a small number of dishes have been loaded into the dishwasher,selecting a programme that operates at the next lowest temperature which should be sufficient.
Programme data
The stated programme data are based on standard operating conditions. The values can vary considerably according to:
different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage
Switching the dishwasher ON
A
Load the appliance and turn on the tap.
Close the door, and set
Press the programme button “C” to select the programme you wish, and the corresponding programme indicator “B” light.
End of programme
B
C
Six beeps will indicate that the wash cycle has finished, the programme indicator light.
13
