en

General information

Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.

Information on comparability tests implemented in compliance with AS/NZS 2007

Appliance loaded in accordance with standard specifications.

Example of loaded dishwasher: See Fig 1 and 2

Capacity: 12 place settings

Comparability programme: Normal

Rinse-aid setting: 5

Detergent: 5g+25g

Fig.1

Fig.2

Height-adjustable top-basket must be inserted in the uppermost position.

When the programme is finished leave the door open 30° to improve the drying performance.

If the comparability tests do not comply fully with AS/NZS 2007, e.g., degree of soiling, type of dishes and cutlery, etc., contact the appliance manufacturer before starting the test.

22

Page 24
Image 24
Haier HDW12-SFE1 operation manual General information