INSTALLATION INSTRUCTIONS
2.Install the dryer with stacking kit on the top of the front load washing machine (Fig.3). Drill two holes on both sides of washer with 2.9mm diameter drill. Detailed drill postion as shown on the stacking kit. Make sure the included screws are used. Fix the stacking kit on the top cover of washing machine, as shown on Fig.4.
Dryer
Stacking kit
Washer
Fig.3 | Fig.4 |
|
Change the venting mode
There are three venting options:
Front venting
The exhaust grill has a range of positions, which allows you to select the optimum exhaust air angle. Simply hold the grill and rotate it until you reach the desired position.
30min
Air Dry
60min
6kg Sensor Dryer
30min
Off |
Extra Dry
| Heat Dry |
Normal |
|
100min | Start/Pause |
60min
Note: If the dryer is mounted on the wall you must use the front venting option.
12
