Haier HDY-D70-E Installtion Installtion

a = 855 mm

b = 620 mm

c = 595 mm

Weight = 43 kg

Checklist of the accessories and materials provided with the machine:

Quantity

To ensure the dryer operates normally, attention must be paid to the

following instructions;

■ The dryer must be level when installed. Its bottom is equipped with

adjustable feet. Adjust these 4 feets to level the unit before operation；

■ Check whether there is any damage to the dryer during transportation.

Any damaged dryer must not be used. if the unit is damaged, contact

your dryer supplier;

■ The dryer must be kept away from flammable substances；

■ The surrounding environment must be dry and ventilated;

■ To allow the dryer to perform better, the ambient temperature shall not be

lower than 10

℃

nor higher than 35

℃.

If the direction of the dryer's door is not suitable to the location, its opening direction

may be changed. The procedure is as follows:

1. Unscrew the 4 hinge screws holding the door onto the machine and remove

the door.

Unscrew the door catch 6 and prise out the catch cover on the opposite side

of the door and transpose them.

. Unscrew the door hinges and prise out the hinge covers on the opposite side

of the door and transpose them.

4. Remove the 4 blanking plugs from the screw holes on the machine and insert

them in the holes on the other side.

5. Refit the door on the opposite side of the machine.

a-door hinge b-catch cover c-door

d-hinge cover e-door catch f-blanking plug

Name

Owner's

manual Certificate of

Conformity Drainpipe

Installtion Installtion

d e