RACK FITTING INSTRUCTION
RACK STORAGE - DRYER INVERTED.
To hold the dryer rack out of the way when not in use, it will be necessary to attach the retaining clip to the base of your dryer.
To do this, firstly remove the screw located 4 cm from the right corner of the inverted dryer ( Fig.3).
Then position the retaining clip over the hole so that the prong on the clip is near the cabinet corner and faces outwards (Fig.4). Tighten clip using the same screw. Repeat this on the left side.
Fit dryer rack to its cabinet mountings. Tilt
rack upwards and align retaining clip until rack frame “snaps” into the prongs of the retaining clips (Fig. 4).
LOADING DRYER RACK
To make use of the drying rack, firstly rotate the outlet grill so that the louvers point towards the rack.
Place items to be dried at the centre of the rack for best airflow.
Shoes should be placed upside down.
A large woollen article e.g. a cardigan, should be placed over the whole rack, and to ensure more even drying will need rearranging from time to time.
Caution:
1.The maximum weight placed on the dryer rack should not exceed 1 kg. 2.Make sure the clothes are suitable for the dryer.
3.As the exhause air temperature rises at the end of a normal drying cycle, it is important that you regularly check items on the rack to make sure they are not overheated.
13
