Haier HG1000TXVEME, HG1200TXVEME, HG800TXVEME, WD800TXVE manual Control pannel

Control pannel

D Detergent distribution drawer

Instructions are printed on the handle of the drawer. Open the drawer, three compartments can be seen:

Compartment 1: Pre-wash detergent

Compartment 2: Normal wash Super quick wash detergent

Compartment 3: Softener, conditioning agent, perfume, etc.

Fig. A

E Door lock indicator

When the light is on, the door is locked.

F Soaking indicator

When this light is on, the washer is in a soaking cycle. If the anti-crease button is pressed and a soaking cycle is started, this light will blink and the time reading on the screen will stop changing.

G Start / Pause button

When the washing machine is connected to the power, and a program is selected, the time reading on the display will stop blinking. Touch this button lightly, the washing machine will start operation automatically; touch it again during operation, operation will pause and the time reading on the display will blink. Press it again to resume operation.

H Anti-crease soaking button

Press this button, the washing machine will start a soaking cycle when the preset softening program is due during any of the synthetic, wool, cashmere and silk wash cycles. Now the washing machine will not drain but start a soaking cycle. And the soaking indicator will blink. If you want to spin the laundry, press this button again, operation will resume.

I Delay wash button

Press this button,the washing machine will start to adjust delay time.Each press of the button,the delay will increase 30 minutes.Keep pressing the button and the delay time will keep increasing.The range is 0-24 hours.For example,adjust it to 10 hours,press the "start" button and the washing machine will end 10 hours later.The delay time should be longer than the washing time.Don’t press this button,if the delay time isn’t needed.

10 7