42
Letter case
You can change from upper to lower case when entering
letters into your phone.
See abc mode (Changing letter case)” on page36 for more details.
Life timer
The life timer displays the approximate total time of all
calls dialed and received with your phone (in hours and
minutes only). The life timer can not be reset and is used
in conjunction with your phones warranty.
Press Menu 2-5-3 (Call log - Call timers - Life timer) to
view your phones life timer.
Note: The actual time invoiced for calls by your service provider
may vary, depending upon items such as network features,
rounding off for billing, and taxes.
Also, see Call timerson page25.
Lights
This is one of the settings in your phones Car profile (see
page55). This feature determines whether the lights are
on only when you use your phone, or if they are on at all
times. This setting works only when your phone is
connected to a car kit.
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use t to highlight the
profile you want and press Options.
Note: Car will not appear in the list until the phone has been
connected to a car kit at least one time.
3. Highlight Customize and press OK. Press t to
highlight Lights and press Select.
4. Use t to scroll through your choices and press OK
If you select Automatic, your phones lights are turned
off within fifteen seconds if no keys are pressed. If On is
selected, then the lights will remain on the entire time
your phone is connected to the car kit.
43
Listen to voice messages
This feature allows you to access your voice messages.
See Voice messageson page73 for complete details.
Lock code
Youll need the lock code to activate and deactivate
Phone Lock (see page53), or to change your lock code. The
default lock code is 1234. If you enter an incorrect lock
code five times in a row, your phone will prompt you for
the security code (see page62).

Changing your lock code

In a lock code, only numeric characters are accepted.
1. Enter Menu 4-3-2-3 (Settings - Security settings -
Access codes - Change lock code)
2. Enter lock code at Enter lock code: and press OK
3. Enter new lock code, press OK
4. Verify new lock code, press OK
Note: When you change your lock code, make sure you store it in a
safe place, away from your phone. Avoid entering access codes
similar to emergency numbers to prevent accidental emergency
calls.
Manual touch tones
This setting determines how long touch tones are
produced as you press the keys on the keypad. Note that
touch tones are sometimes called DTMF tones.
See Touch tone lengthon page70 for details.

Setting manual touch tones

Press Menu 4-2-3-1 (Settings - Phone settings - Touch
tones - Manual touch tones) and highlight one of the
following options, then press OK.
Continuous means the tone sounds for as long as
you press and hold the key.