62
2. Scroll to Options, then press Select
3. Press Select at Scrolling view
4. Press t or s to select either Name list, Name+number,
or Name only, then press OK
Security settings
This menu includes the following security features:
4-3-1 Restrict calls - See page57.
4-3-2 Access codes - See page17.
The Access codes submenu includes Phone lock (page53),
Unlocked phone number (page72), Change lock code
(page43), and Change security code (page62).
Security code
Your phone will prompt you for a five digit security code for
certain features. These features can be used only after the
correct security code has been successfully entered.
Note: When entering your security code, ***** will appear on the display
to keep others from viewing your code.
If you make a mistake entering the code, erase the last entered
digit by pressing Clear (or press and hold Clear to delete all
the digits on your display). Then enter the correct code or press
Back to exit the current feature.
If you enter an incorrect security code (Code error will appear)
five times in a row, your phone wont accept any entries for
the next five minutes.
Your phones default security code is 12345. Its highly
recommended that you change this code at once, write it down,
and store it in a safe place away from your phone.

Changing your security code

1. Press Menu 4-3-2-4 (Settings - Security settings -
Access codes - Change security code)
2. Enter security code and press OK
3. Enter new security code at Enter new security code:,
63
press OK (must be five digits)
4. Enter new security code again at Verify new
security code:, press OK
5. Phone will display Security code changed
Note: If you have changed your security code and dont remember
the new code, contact your service provider. Once you have
changed your security code, the default setting is no longer valid.
Send own caller ID with next call
In most service areas, when you call someone your name
will be presented to his/her caller ID (if they subscribe).
This feature allows you to block their caller ID (your
number will not be displayed) when you call them. This
feature works on a per-call basis. Contact your service
provider for more details.
Please be aware of the following:
This feature is only effective when calling to a number that
is equipped with Caller ID.
This feature is available only when supported by the
wireless network, and may not function if you are roaming.
Note: Before you can activate this feature, you should first store
the feature code given to you by your service provider. Otherwise,
this feature may not appear in the menu or function properly.
Check with your service provider to confirm if the feature code has
been pre-programmed for you. See Network feature settingon
page47 for more details.
1. Press Menu 4-4-3 (Settings - Network services -
Send own caller ID with next call)
2. t to Yes (to show your number) or No (to not show
it) and press OK
3. Enter the number you wish to call (or press Search
to retrieve the number from the phone book and
press OK), then press OK
4. Your phone will attempt to call this number with the
feature code you stored in Menu 4-4-4 (see Network
feature settingon page47)