Operation
|
|
|
| Play |
|
|
|
| Fast forward |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pause |
|
|
|
| Fast reverse |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
3.Playback speed.1x,2x,4x,8x,16x,32x.
4.Playback position. The playback position is always at the center of the time bar.
5.Time scale, which shows the scales of every half hour. The text would move smoothly as the time go by. And the time scale text could be
Note
RTime Shift function is only available in DTV mode.
RThe maximum recording duration is determined bduration time can be calculated by the formula.
RThe timeshift record only supports FAT32 file- system.
RThe timeshift record supports more than 4GB recording. That is, the timeshift data is stored in
RThe recording buffer is a ring buffer. For ring buffer, if the maximum recording duration is reached, the oldest program would be discarded and keep recording the latest program.
RWhen changing channel or changing input source, the timeshift would stop automatically.
RTimeshift record will store the fact of no signal.
RTimeshift record will store the video, audio and data service. But because of the limited number of PID filter in hardware, we only support:
Video streams: Max 1 stream
Audio streams: Max 8 streams
CC stream: No limited.
RIn recording, the data is not guaranteed to be stored in the disk. If the timeshift playback plays a corrupted data block, it would show “Data lost” message to indicate that the current data is not stored correctly
Function Menu Options
APress MENU button and CH+/- button until the following menu appears on the screen.
Video | Language | English | |
OSD Timeout | Short | ||
| |||
Audio | OSD Transparency | Middle | |
| DPMS | On | |
Channel | Blue Screen | On | |
| DCR | On | |
Function | Time Setup |
| |
Lock | Closed Caption |
| |
Default |
| ||
|
| ||
Function | CH+/- | Select EXIT Back | |
VOL+/- |
BPressVOL+/ ENTER button to enter the menu and
CH+/- button to go up and down to select the desired option.
CPressVOL+/ ENTER button to confirm and VOL+/- button increase and decrease the level to adjust the selected option to your preference.
DRepeat step 2 and step 3 until desired quality has been achieved.
Function
YLanguage:Press VOL+/- button to select language of the OSD.
YOSD Timeout: Press VOL+/- button to select Middle /Short and Long to change thetime of the OSD display.
YOSD Transparency: Press VOL+/- button to select among Low/High and Middle to change the transparency of the OSD. To select Low, the OSD is opacity.
YDPMS: PC Power Management. To set On, the set will be in standby mode automatically if no signal in 2 minutes; if signal input , the set will be on again automatically.
YBlue Screen: Press VOL+/- button to select On, the screen will be in blue after 3 seconds if there is no signal.
YDCR: Press VOL+/- button to select On or Off.
YTime Setup: Press VOL+/ ENTER button to enter the submenu.
q Time Zone: Press VOL+/- button to select the appropriate time zone.
Video | Time Zone |
|
Date/Time |
| |
|
| |
Audio | Sleep Timer | Off |
Channel
Function
Lock
Time Setup | CH+/- | Select EXIT Back |
VOL+/- |
qDate/Time: Press VOL+/ ENTER button to enter the submenu.
Haier LED HDTV |
