ENGLISH
Operation Instructions
SIGNALS DURING OVEN SETTINGS ONE BEEP: Oven accepts the entry. TWO BEEP: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
1.Touch TIMER/CLOCK for 3 seconds to enter programming mode. The display will show Hr 12
2.Using the number pads enter the 4 digit correct time
a.example 5:23 in entered as 0,5,2,3
b.example 12:15 is entered as
1,2,1,5
3.Press the TIMER/CLOCK pad to finish.
Please note: If you want to use
Setting the Timer
The timer operates as a minute timer.
1.Press TIMER/CLOCK pad.
2.Enter the amount of time you want to countdown.
3.Press the Start pad. When the time is up, the timer will signal.
4.The display will show the countdown time for 5 seconds then revert to the current clock time. You can check the timer by pressing the TIMER/CLOCK
NOTE: The timer operates without microwave energy. The maximum time you can set is 99 minutes and 99 seconds.
SETTING CHILD LOCK
The safety lock prevents unsupervised operation by children. Set the function in standby mode.
To Set: Press and hold STOP/CANCEL for 3 seconds. Lock icon is indicated on
the display and there will be a long beep.
To Cancel: Press and hold STOP/ CANCEL for 3 seconds, there will be a long beep. Lock icon disappears from the display
SETTING THE POWER LEVEL
The default power output setting is 100%. If you want to set a new power level touch the POWER LEVEL pad, repeatedly touch POWER LEVEL to scroll through the different cooking power levels.
Number | Cooking | Number | Cooking |
Pad | power | Pad | power |
|
|
|
|
P100 | 100% | 50% | |
|
|
|
|
90% | 40% | ||
|
|
|
|
80% | 30% | ||
|
|
|
|
70% | 20% | ||
|
|
|
|
60% | 10% | ||
|
|
|
|
Quick 30 Seconds
The Start/+30sec pad can be used to set the time for cooking or for adding extra cooking time while food is already cooking.
NOTE: The microwave’s power level is automatically set to 100%
EXPRESS COOK
One touch cooking at 100% power is available by using the Express Cook feature. When the microwave is idle, select a cooking time by selecting the 1 through 6 number pad or the START/+30 Sec pad. You can add time, in 30 second increments, by touching the Start/+30 Sec pad.
Page 12 • Set Up & Use
