English
Operating Process
1.Water is pumped from the water storage tank to the water box, which may take up to 48 seconds.
2.The
3.It will take approximately
Note: If the ambient temperature is below 59˚ F, then small or medium ice cube sizes are suggested to prevent ice cubes from fusing together.
4.Approximately 60 seconds later, the water box will tilt backwards and the ice pusher will push the ice into the ice storage basket. After the water box flips back to its original position, the next
5.When the maximum capacity of ice cubes is collected and the ice reaches the temperature sensor, the icemaker will automatically stop operating. The LCD display will show “FULL”. Remove the ice from the ice storage basket. Then replace the basket into the machine, making sure that the basket is pushed back to its original position. This will ensure that the temperature sensor is above the basket so that the machine operates properly.
6.To continue making ice, check that there is water in the water storage tank. If there is no water in the water storage tank, and no water is being pumped
into the water box, the operation will stop and the LCD display will show
“POUR”. Fill the water storage tank with water and press the button for the icemaker to begin operating again.
7.When the LCD display shows
7