Preparation
iÉÑíLoáÖÜí=aççê=léÉåáåÖ
The door of the refrigerator can be opened both from the left or right as required. The following are the steps required to position the door to open to the right.
1. Firmly hold the refrigerator door and remove the screws from the right lower hinge. Remove the door and place aside. Remove the lower pivot pin and install it in the left lower hinge hole.
Lower hinge
Lower pivot pin
Lower pivot pin hole
2.Remove the middle hinge and the washer on the middle connection and then remove the door. Put the door aside.
3.Remove Both of the top hinge covers and the hinge screws. Install the right upper hinge cover (supplied).
4.Fix the left upper hinge to the left side and then the
left upper hinge cover.
4. Fit the left hand top hinge and the left hand hinge cover (supplied)
5. Mount the refrigerator door to the left of the housing with the middle hinge connected.
Pivot pin hole
Middle hinge
Middle pivot pin
Middle pivot pin
Washer
Upper hinge
Hinge cover
Hole stoppers
Washer
Middle hinge
6.Mount the refrigerator door with the top left hole on the down pivot pin of the middle hinge.
7.After installation, open and close the door several times and tighten the hinge screws when the door operates normally
Make sure the door seals with the cavity all the
Lower hinge
Lower pivot pin
wayaround both doors
10
