Door removal
Removing the door
If your house door is too narrow, remove the refrigerator door and carry the refrigerator in narrow side first.
Remove the toe moulding, and then | Toe moulding |
release the water coupler. |
|
Slide the toe moulding up to remove it, and then release | Water coupler |
the water coupler while pressing on area (1) as shown in |
|
the illustration. |
|
Defrosting · Cleaning
Defrosting
The appliance defrosts automatically.
Cleaning
Clean the refrigerator regularly to prevent odour
For safety reasons, first unplug the power cord.
Clean the appliance using a soft rag or sponge and lukewarm water, to which you may add a little bit of a neutral dishwashing liquid.
Dry off surface water with a rag.
Remove the freezer compartment door.
1)Unscrew the hinge covers. Disconnect all wires except for the grounding wire.
2)Remove the screws from the upper hinge following the direction as indicated by Arrow (1). Then remove the upper hinge following the direction as indicated by Arrow (2).
Hinge cover
Upper (hinge)
Wires
Grounding wire
Upper hinge Screw
Caution: Do not use pointed objects, metal brushes or the following chemical solvents:
abrasive cleansers, varnish, amyl acetate, hot water, acid, alkaline cleaners, etc.
Caution: Do not pour water onto the appliance.
Use a rag or sponge to clean and dry the controls and lights.
3) Lift the freezer compartment door to remove | Lift |
it. Next, lift the door enough to be able fully | Lift until water |
pull out the water line. | line can be fully |
Lower | removed. |
hinge |
|
10
Be sure to clean the door seal regularly.
31
