Haier HSM09RU03, HSM09RU03, 2HUM18R03, HSM09RU03, HSM12RU03, 2HUM18R03 Timer On/Off Operation

Operation

Timer On/Off Operation

Remote Controller

	TEMP
HEALTH		FAN
		SWING
MODE	H.AIR.
SLEEP	FRESH
CLOCK		SET
TIMER
LOCK	LIGHT	CODE RESET

Set clock correctly before starting TIMER operation.

1.After unit starts, select your desired operation mode Operation mode will be displayed on LCD.

2.Timer mode selection

Press TIMER button to change TIMER mode. Every time the button is pressed, display changes as follows: Remote controller:

BLANK

TIMER ON TIMER OFF TIMER ON-OFF

Then select your desired TIMER mode (TIMER ON or TIMER OFF). " "or " "will flash.

3.Time setting

Press HOUR	button.
Every time the button is pressed, time setting

increases 1 min, if kept depressed, it will increase rapidly.

Every time the button is pressed, time setting decreases 1 min, if kept depressed, it will decrease rapidly.

It can be adjusted within 24 hours.

4.Confirming your setting

After setting correct time, press SET button to confirm

" "or" "on the remote controller stops flashing. Time displayed: Unit starts or stops at x hour x min. (TIMER ON or TIMER OFF).

5.Cancel TIMER mode

Just press TIMER button several times until TIMER mode disappears.

Hints:

After replacing batteries or a power failure happens, time setting should be reset. Remote controller possesses memory function, when use TIMER mode next time, just press SET button after mode selecting if time setting is the same as previous one.

17