Haier HSU-09HS03/R2(DB) operation manual Timer On-OffOperation, Remote Controller

Operation

Timer On-Off Operation

Remote Controller	Set clock correctly before starting TIMER operation.
	1. After unit starts, select your desired operation mode
	Operation mode will be displayed on LCD.
	2. Timer mode selection
	Press TIMER button to change TIMER mode. Every time
	the button is pressed, display changes as follows:
	Remote controller:			BLANK
		TIMER ON	TIMER OFF	TIMER ON-OFF
	Then select your desired TIMER mode (TIMER ON - OFF).
	"	"will flash.
	3.Time setting
	Press HOUR		button.
		Every time the button is pressed, time setting
		increases 1 min , if kept depressed, it will increase			rapidly.
		Every time the button is pressed, time setting
		decreases 1 min, if kept depressed, it will decrease			rapidly.
		It can be adjusted within 24 hours.
	4.Timer confirming for TIMER ON
	After setting correct time, press TIMER button to confirm
	"	" on the remote controller stops flashing.
	"	" starts flashing.
	Time displayed: Unit starts or stops at x hour x min.
	5.Time setting for TIMER OFF
	Just press HOUR button ,follow the same procedure in
	"Time setting for TIMER ON"

6.Time confirming for TIMER OFF

After time setting,press SET button to confirm. " " on the remote controller stops blinking. Time displayed:Unit stops at x hour x min.

To cancel TIMER mode

Just press TIMER button several times until TIMER mode disappears.

According to the Time setting sequence of TIMER ON or TIMER OFF, either Start-Stop or Stop-Start can be achieved.

17