Haier HSU-09HS03/R2(DB) Specifications, The machine is adaptive in following situation, Cautions

Cautions

Do not obstruct or cover the ventilation grille of the air conditoner.Do not put fingers or any other things into the inlet/outlet and swing louver.

Do not allow children to play with the air conditioner.In no case should children be allowed to sit on the outdoor unit.

7.The appliance is not intended for use by young children or infirm persons without supervision.

8.Young children should be supervised to ensure that they do not play with the applience.

9.Please employ the proper power plug, which fit into the power supply cord.

Specifications	10.The power plug and connecting cable
The refrigerating circuit is leak-proof.	must have acquired the local attestation.

The machine is adaptive in following situation

1.Applicable ambient temperature range:

	Indoor	Maximum:D.B/W.B	32oC/23oC
Cooling		Minimum:D.B/W.B	18oC/14oC
	Outdoor	Maximum:D.B/W.B	43oC/26oC
		Minimum:D.B	18oC
	Indoor	Maximum:D.B	27oC
		Minimum:D.B	15oC
Heating	Outdoor	Maximum:D.B/W.B	24oC/18oC
		Minimum:D.B/W.B	-7oC/-8oC
	Outdoor	Maximum:D.B/W.B	24oC/18oC
	(INVERTER)	Minimum:D.B/W.B	-15oC

2.If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person.

3.If the fuse of indoor unit on PC board is broken,please change it with the type of T. 3.15A/ 250V.

4.The wiring method should be in line with the local wiring standard.

5.After installation, the power plug should be easily reached.

6.The waste battery should be disposed properly.

11.For the unit H2SM-18HS03/R2 Through poor conditions of the electrical MAINS, shortly voltage drops can appear when starting the EQUIPMENT.This can influence other equipment (eg. Blinking of a lamp). If the MAINS-IMPEDANCE Zmax<0.325 OHM, such disturbances are not expected. (In case of need, you may contact your local supply authority for further information.)

12.For the unit HSU-18RS03/R2 Through poor conditions of the electrical MAINS, shortly voltage drops can appear when starting the EQUIPMENT.This can influence other equipment (eg. Blinking of a lamp). If the MAINS-IMPEDANCE Zmax<1.088 OHM, such disturbances are not expected. (In case of need, you may contact your local supply authority for further information.)

13.For the unit HSU-22RS03/R2 Through poor conditions of the electrical MAINS, shortly voltage drops can appear when starting the EQUIPMENT.This can influence other equipment (eg. Blinking of a lamp). If the MAINS-IMPEDANCE Zmax<0.094 OHM, such disturbances are not expected. (In case of need, you may contact your local supply authority for further information.)

2