United States Stove B9945N Standard Wiring from Factory, Wiring of the RCK60 Remote Control KIT

WIRING GUIDE FOR 9945

The following Wiring Guide is to help assist in the wiring of any combination of the Optional Kit listed below:

RCK60 - REMOTE CONTROL KIT

WSK60 - WALL SWITCH KIT

WTK60 - WALL THERMOSTAT KIT

IMPORTANT: Before ordering or installing any to the available kits, remember the following...

1)Not all Optional Kits will work together. Example: The (RCK60) Remote Control Kit, the (WSK60) Wall Switch Kit, and the (WTK60) Wall Thermostat Kit cannot be used at the time.

2)When using any of the three Optional Kits listed above, the Rocker Switch on the unit must be set to "OFF".

3)If you choose to use any combination of the above Optional Kits, only one of those kits can be used at a time. Example: If you have the Optional Remote Control Kit and the Optional Wall Switch Kit, operation of the unit must be controlled by one or the other. If you want to use the remote control, simply turn the Wall Switch to "OFF".

STANDARD WIRING FROM FACTORY:

CONTROL VALVE

PILOT

	L
	PI OT
F	Sit	O
F
O		N

E A

TP TH TP TH

ROCKER SWITCH

WIRING OF THE RCK60 - REMOTE CONTROL KIT:

CONTROL VALVE

			PILOT
	L
	PI OT
F	Sit	O
F			TH
O		N
			TP
E		A	TP TH

PIGGYBACK

DISCONNECT

REMOTE CONTROL

SENSOR

ROCKER

SWITCH

Remember the Rocker Switch must be turned to "OFF" while using the Remote Control.

WIRING WITH THE WTK60 - WALL THERMOSTAT KIT:

		10	21	32	c
CONTROL VALVE	WALL	50	60 70	80 90
	THERMOSTAT

Remember the Rocker

FF

O

E

PILOT

Sit

O

N

A

PILOT

TP TH TP TH

PIGGYBACK

DISCONNECT

10 21 32 c

50 60 70 80 90

ROCKER SWITCH

Switch must be turned to "OFF" while using the Wall Thermostat.

24