English
INSTALLING YOUR WINE CELLAR
Unpacking Your Wine Cellar
1.Remove all packaging material. This includes the foam base and all adhesive tape holding the wine cellar accessories inside and outside.
2.Inspect and remove any remains of packing, tape or printed materials before powering on the wine cellar.
Leveling Your Wine Cellar
•Your wine cellar has four leveling legs which are located in the front and rear corners of your wine cel- lar. After properly placing your wine cellar in its final position, you can level your wine cellar.
•Leveling legs can be adjusted by turning them clockwise to raise your wine cellar or by turning them counterclockwise to lower your wine cellar. The wine cellar door will close easier when the leveling legs are extended.
Electrical Requirements
•Make sure there is a suitable power Outlet (115 volts, 15 amps outlet) with proper grounding to power the wine cellar.
•Avoid the use of three plug adapters or cutting off the third grounding in order to accommodate a two plug outlet. This is a dangerous practice since it provides no effective grounding for the wine cellar and may result in shock hazard.
Use of Extension Cord
•Avoid the use of an extension cord because of potential safety hazards under certain conditions. If it is necessary to use an extension cord, use only a
5
