Haier HVS1200 Power supply Water supply, Detergent selection Laundry treatment, Wash load

Preparation

1.Power supply	2.Water supply
Plug in the power supply	220 -240 V~ Turn on the tap ensure that the water in clear.
/50HZ	Caution:Before staring the washing machine turn on the water
	faucet to ensure the water faucet and the water inlet hose are
	connected correctly and do not leak

3.Detergent selection	4.Laundry treatment
Only special low foam detergent should	Sort out clothes according to type and extent of dirt.There are
be used in automatic drum washing	three types of clothes:cotton,synthetical and woolen (silk) fabrics.
mashine,form blended or wool fabrics	Separate white clothes from colored.If whites and coloreds
special deter-gent should ne used.dry
	are combimed for one load,make sure the coloreds are colorfast
clearning solvent should not be used
such as trichhloroethy-lene or alike
(caution :load the required amount of
detergent only).
	-Clothing with frayed edges or yams should be put in a wash
	bag or special bag before washing
	-repair damged clothing,lose buttons or damaged zips
	and hooks before washing.
	-Bed sheets and table ware should be loosely loaded and not
	folded.
	This washing mashine is for househould use and designed
	for mechanically washable clothes.When washing,separate
	unwashable clothes with reference to clothes labels.

5.Wash load

Type	Cotton fabrics	Synthetic fabrics	Wool/cashmare/silk fabrics
Max load	NJ	NJ	NJ

Functions

Note.

If Program key is turned after reservation time is set and before program starts, the reservationwill be automatically cancelled.

When reservation feature is activated, the washing start time is fixed. There will be some difference between the reserved time and the actual program completion time due to different water inlet time and load distribution condition during spin-dry process.

E. LCD

LCD is a window to display information including washing status, washing progress, reservation time, remaining time, heating temperature, spin-dry speed, load selection and error etc. as well as to display additional features such as power clean, super clean rinse and foaming auto-check etc.

F. Start/Pause Key

When the washer is energized, select the desired washing program and press the Start/Paus

key. The indicator lamp on the upper left corner of the key will illuminate to indicate that the

washer has started operation. If it needs to pause the washing process, simply press the Start/

Pause key and the indicator lamp and remining time display will blink and the washer enters into

condition. Press the Start/Pause key again to resume washing process.

(Note: Press the Start/Pause key only after the desired program and feature are set.

G. Rinse Hold Key

Press the key lightly,the screen displays the symbol.The washing machine does not drain the water after the last rinse,but the laundry remains in a soak.To spin the laundry ,press this key again .The symbol disappears from the screen and the program continues to the end .The function is used to prevent the laundry creasing when left in the drum for a long time .

H. Temperature Selection Key

Press the key and LCD will display the selected heating temperature, which is adjustable as

o.

needed. Note: 20C means cold water washing and no heating is involved.

I.Spin Speed Selection Key

Press the key and LCD will display the selected spin-dry revolution speed, which is adjustable

as needed. (When No Spindry -feature is selected, the time will decreasecorrespondingly.)

J.Load Selection key

Turn the Program Knob to select the desired program (see Program Setting Guidance Table)

Press the key and manually select different programs and power-saving and water-seaving fea-

ture based on the volume of load. LCD will display L-1(2,3,4,5),indicating the washing load is 1 (2,3,4,5) kg and program time will change accordingly. (The feature is not available in Wool,

Cashmere, Silk, Speedy, Drainage Only and Spin Only Program. Only L– 1, 2, 3 are available for Chemical Fiber program. )