Installation
Remove all the packing materials (including the EPE base)to prevent vibration during use, as shown in the right picture.Upon opening of the package, water drops may be seen on the plastic bag and the porthole. This is normal phenomenon resulting from water test in the factory.
Check attachments and materials with reference to the following
Qty Name Operation | Quality | Water | Drainage | Warrantly | Plastic | ||
Model | manual | certificate | hose | holder | card | plugs | |
|
|
|
|
|
| ||
HVS1200 | 1 | 1 | 1 | 1 | 1 | 3 | |
HVS1000 | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe place for later use)
Fig.2
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine. Before use, the washing machine should be adjusted, as shown in Fig. 3, so that it is level.
Fig.3
4.Clean the filter Cleaning methods (once a month)
1)Pick up the bottom cover lightly (Fig. 1);
2)Screw out filter by turning counterclockwise (Fig. 2);
3)Flash clean with running water;
4)Replace the filter by turning clockwise and remount the cover.
Caution: The filter must be in place, or it may lead to leakage. (Fig3)
Fig1Fig2
Fig3
13
4
