ENERGY SAVER operation
1. Start
Press POWER button.
2. Select operation mode
Press MODE button. For each press, operation mode
changes as follows: |
|
| FAN |
| COOL |
| DEHUM |
|
Then select COOL operation.
When the COOL display lights bright,the unit will be working under the COOL function.
Saving energy function only can be used when A/C working on cooling condition.
ENERGY SAVER selection
When this function is selected, the fan will shut off three minutes after the compressor cycles off. This will reduce energy consumption and noise. When the compressor turns back on, the fan will turn on at the same time. If this function is not selected, the fan will not shut off when the compressor cycles off.
4. Stop
Press POWER button again.
FAN SPEED
3
4
4
FAN SPEED
7