Haier HWM-6.5/S b.Operating procedure and explanations for the buttons

STANDARD
JEANS
GENTLE
QUICK WASH
SOAK
WASH
RINSE
SPIN
SURPLUS MIN
RESERVE HOURS LATER
WATER
SELECTION
LEVEL
SELECTION
PROGRAM
SELECTION
PROCEDURE
CALEFACTION
ATION
RESERV
PAUSE
START
ON/OFF
POWER
b.Operating procedure and explanations for the
buttons
After switching on, the "Standard" program will be the default. If other full-automatic program is
desired, you can press the button " " to get the corresponding
indicator on. Refer to the "Button of ' '"
paragraph on page 10.
Example: Use the "Quick" program for slightly soiled articles.
PROGRAM/SELECTION
PROGRAM/SELECTION
When "standard" program is selected, the washing machine will perform full-automatically
controlled fuzzy program to set water level, water flow and wash duration according to the
cloth nature and weight
Page 10
1 Press the "POWER ON/OFF" button to switch on
the power supply
2 Press the button of" "to
select a suitable full-automatic program
PROGRAM
POWER
ON/OFF
SELECTION
PROCEDURE
After switching on, the washing machine heating function will be
automatically set inactive.
In order to select heating function, the"RESERVATION/CALEFACTION"button
should be pressed for more than 2 s until the heating indicator is lighted, which means
the heating function is selected. The initial status is 30 , and 40 or 20 can be
selected if you press"RESERVATION/CALEFACTION"button again in 3s.
It has the special power resume function. In the case of power failure
or the power plug is loose during washing, the machine can save
the running program, and resume the program after the power
supply is recovered. You do not need to set the program again.
12