Shut-Down Shut-Down Instructions, Procedures

Shut-Down

1.Turn the “On/Off” Ball Valves on the Air Manifold to their “Off” position.

2.Turn catalyst yellow ball valve, P/N 21228-00 to Open / Recirculation position to dump psi. and close the valve.

2.Pressure should be maintained on the material hose.

6HH6SUD\*XQ8VHUPDQXDOIRUSURSHUVKXWGRZQ

Material Pump should be stopped with Pump Shaft in UP position. Shaft should be cleaned of any over-spray or foreign material.

Material Pump Lube Cup should be emptied, cleaned

RUPDWHULDOVXSSOLHUIRUWKHLUUHFRPPHQGDWLRQRID

OXEULFDQWWKDWZLOOEHVXLWDEOHIRUXVHZLWK\RXU

Material Pump should now be cycled so that shaft is left in DOWN position during shut-down period.

UHVXOWLQRYHUVSUD\RUOHDNHGPDWHULDOWRGU\RU

KDUGHQRQ6KDIW:KHQ3XPSLVQH[WRSHUDWHG

VHYHUHGDPDJHVPD\EHGRQHWR8SSHU

Pump Seals.

6HHSDJHIRUSUHVVXUHUHOLHISURFHGXUH

GC-1392Z