Graco Inc GC-1392 Z Start-Up, Before Operating the System, Set-up is fully operational

Start-Up

5HIHUWRVSHFL¿F8VHU0DQXDOVIRUGHWDLOHG

component start-up and shut-down instructions.

5.Review all service manuals, which contain detailed operation and safety instructions.

Before Operating the System

1.0DNHVXUHDOOKRVHFRQQHFWLRQVDUHWLJKWDQGVHFXUH

2.0DNHVXUHWKHEDOOYDOYHVRQWKHPDQLIROGDUHRII and all of the regulators are dialed down to zero.

7XUQLQJUHJXODWRUVFRXQWHUFORFNZLVHZLOOGLDOWKHP

down.)

3.&ORVHWKHE\SDVVYDOYHRQHDFKRIWKHÀXLGVHFWLRQV

7XUQFORFNZLVHWRFORVH

4.(DFKQHZ*ODV&UDIWV\VWHPKDVEHHQÀXLGWHVWHG at the factory. Our pump test solution is red-colored DBP (Di-N-Butyl Phthalate). There may be a re- sidual amount of DBP in system that should be- evacuated before putting the unit into production.

'XULQJWKHLQLWLDOVWDUWXSòWRJDOORQRIPDWHULDO

should be dispensed. This is typically adequate to

UHPRYHWKHWHVWPDWHULDO,IGHVLUHGWKHÀXLGSXPS

FDQEHÀXVKHGZLWKDVXLWDEOHFOHDQLQJVROXWLRQWR

evacuate DBP before priming with material.

Start-UpInternal Mix

6ROYHQW

*Before initial operation of any internal mix

V\VWHPHQVXUHWKDWWKHVROYHQWÀXVK

set-up is fully operational.

1.)LOOVROYHQWSRWZLWKVXLWDEOHÀXVKPDWHULDO

2.Open main air valve at manifold.

3.Open ball valve at solvent regulator.

GC-1392Z 13