Graco Inc GC-1392 Catalyst, SurshuVroyhqwÀxvklqjDwWkhJxq, 6ROYHQWÀXVKJXQ

Start-Up

4.Dial up 90-100 psi of pressure at solvent regulator.

5.Using a proper collection container, open solvent

ÀXVKYDOYHDWWKH,1'\JXQ(QVXUHWKDW\RXKDYH

SURSHUVROYHQWÀXVKLQJDWWKHJXQ

Catalyst

1.3XOODQGURWDWH3LYRWNQRE to disengage the catalyst drive

arm.

2.Turn the catalyst slave

pump yellow ball valve to the open position.

3.Hand prime the pump

until a steady stream of catalyst

ÀRZVEDFNWRWKHERWWOH

4.Close the ball valve. Hand

VWURNHWKHSXPSXQWLOLWGHYHORSHV 100-200 PSI.

5.While continuing to hand prime the pump, trigger gun into suitable collection container.

6.Continue to hand prime the pump, with trigger pulled

DQGLQVSHFWWKHÀRZRIFDWDO\VWIURPQR]]OH

7.Once all air is evacuated and a steady stream of catalysts observed, the system is primed with catalyst.

8.Release trigger and stop hand priming.

9.6ROYHQWÀXVKJXQ

14 GC-1392Z