Set-Up
1.Remove the cap plugs from the bottom inlet of each material pump.
2.Attach one end of the green material hoses to the
SXPSLQOHWVDQGDWWDFKWKHRWKHUHQGWRWKHSLFNXS
tubes and place them in the material drums.
3.$WWDFKWKH³¿WWLQJ´HQGRIWKHUHFLUFXODWLRQKRVHVWRWKH bypass valve on the material pumps. and place the other end in the material drum, either in the small bung
RUWKHODUJHEXQJDQGWDSHLWWRWKHSLFNXSWXEH
4.Inspect Catalyst bottle for debris; clean if necessary.
Fill catalyst supply bottle. Two gallons; maximum amount in supply bottle.
5.,QVSHFWWKHPDWHULDOKRVHVWRPDNHVXUHWKH\DUHQRW
bent.
3.
2.
4.
7 |
