After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the
"RESERVATION/CALEFACTION”button to set a reserved wash program.
Refer to The button of "RESERVATION/CALEFACTION"on page 11.
When "Reservation" becomes active, the nixie tube displays the time
to the end of the reserved wash cycle, and the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect. the washing will finish
about 18 hours later
Confirm the reserve program

6 Press the "start/pause" button

5 Push the " RESERVATION/CALEFACTION"
button to select suitable reserve program
Close the top lidFinish washing
Except water filling (excluding heating function) and draining process,
if the top lid is opened, the machine will stop running and alarm.
The washing machine cuts off the power supply automatically when wash cycle ends.
Afterswitching on the power, pressthe button "WATER LEVEL"to select a waterlevel accordingto the load. Please refer to the button " Waterlevel" on page 10.
Page10

4 Press the "WATER LEVEL" button to select

suitable water level

Page11
WATER
SELECTION
LEVEL
CALEFACTION
ATION
RESERV
Keep pressing the"RESERVATION/CALEFACTION" button for more than 2 s,
the heating indicator turns on (red).
Keep pressing the"RESERVATION/CALEFACTION"button for more than 2 s again, the
heating indicator turns off and heating function is cancelled.
After the machine starts running, if selection or cancellation of heating function
is desired, you should switch off the power and reselect.
Confirm the heating function
PAUSESTART
14