Haier HWM55-13S user manual Washing sequence

Washing sequence

Water-filling selector handle

Overfilling sign

Wash timer	Wash selector	Water-filling entrance	Buzzer	Spin timer
(To set to below 2 minute,	(Standard current,	(The buzzer will ring when		(to set to below 1 minute,
first set to 6 minute then	strong current)	the	washing finishes)	first set to 2 minute then
turn it back. it can increase				turn it back. it can increase
the service life of the timer).				the service life of the timer).

OFF	SILK		STRONG
	WOOL
		STANDARD
				DRAIN
	COTTON
		WASH SELECTOR
	LINEN

WASH TIMER

BUZZER	OFF
OFF

MAX

SPIN TIMER

Wash

1.Water inlet selector

(1) Set the water inlet selector at the "WASH" side.

(Figure 1)

WASH SPIN

(2) Set the water level adjusting lever to needed line.

2. Fill the water and add the dissolved washing

powder to make the water level reach the preset

position. (Figure 2)

Run washing program for some time to stir and

dissolve the powder completely.

3.Put in the laundries. If the water quantity is insufficient, please add water.

4.Select the current.

STRONG

STANDARD

Figure 1

Figure 2

DRAIN

WASH SELECTOR

Figure 3

Select the strength of the current according to the laundries. (Figure 3)

5.Select the washing time

Select the washing time according to the laundries. (Figure 4)

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

OFF

SILK

WOOL

	LINEN	Figure 4
	COTTON
WASH TIMER

STRONG

STANDARD

DRAIN

WASH SELECTOR

Figure 5

8