b Steps of using the operation buttons and |
description of the steps |
How to change the direction of the drain hose
1.Dismantle the rear cover of the washing machine.
3.Dismantle the drain outlet protecting cover at the other side, (the way is the same as the drain bushing),then install the drain
Soak
20
15
43
36
28
20
12
46 |
| Standard |
| Normal | Tub dry |
|
|
|
|
|
|
4 0 |
| Fibre |
| Quick |
|
|
|
|
|
|
|
3 2 |
| Woollen |
| Jean |
|
2 4
1 6
er Pow
dry
Tub
2.Put down the drain hose 
Take off the drain hose frame as indicated in Figure 1.Take the drain hose into the cabinet 
then nip the drain fixing clamp to make
it deviated from the clip | the other hand is used to put |
down the drain bushing | as indicated in Figure 2 3. |
bushing, as indicated in Figure 4.
4.Extend the drain hose from the other side. Fix the drain hose with drain hose frame onto the cabinet, as indicated in Figure 5.
Wash
6 
Rinse
Spin Reserve
Program
Water
level
Drain hose |
drain outlet protecting
cover |
5
Drain hose support |
| Drain bushing | ||
Figure 1 | Cabinet | Figure 2 | ||
Inner | Outer | |||
|
| |||
| Push |
| Drain bushing | |
Figure 4 | Figure 5 |
Drain bushing |
|
5.Install the drain outlet protecting cover to the other side, as indicated in Figure 6 
1.Push "power" button to switch on the power
Power
2.Push "program" button to select suitable full-auto program
After the power is switched on, "normal"is automatically set. To select other
Drain hose fixing | Take down | |
clamp | Figure 6 | |
Push | ||
Figure 3 |
Remarks: in order to make sure of the correct of installation, it is suggested to change the direction of the drain hose with our company serviceman .
Usage the drain hose
E.g. Set to "Quick wash" program for small quantity of laundries with light soil.
In selecting the 
NORMAL
or
standard
program, the machine will execute fuzzy program to select water and wash time according to the cloth and weight of the laundries. The full procedure is controlled automatically.
Push the "SOAK", "WASH", "RINSE" OR "SPIN" button to select suitable procedure.
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way.
2.Do not step on or press the drain hose.
4.If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m.
Soak
Wash | Rinse | Spin |
| ||
|
|
3. If the drain hose is too long, cut it at mid point. To make 5.If the extra hose is too long, cut it either at A or at B. smooth drainage, cut the front end of the hose slantingly.
12 | 5 |
