Haan HD-50 user manual Care & Maintenance cont, Mineral Deposits

Models: HD-50

1 33
Download 33 pages 14.78 Kb
Page 20
Image 20
Care & Maintenance (cont)

Care & Maintenance (cont)

CAUTION

DO NOT overfill the water tank. Add only 1 cupful of the included Fill Cup to add water to the tank. There is a fill line indicating the correct level just inside the opening to the Water Tank.

CAUTION

Keep the Fresh RinseLime

&Scale Remover in a cool, dry place. Keep out of the reach of children.

Irritant - avoid contact with eyes, skin and clothing. DO NOT breathe dust. void prolonged or repeated exposure. DO NOT ingest.

!IMPORTANT

Fresh RinseLime & Scale Remover is only for use with HAAN® Steam Cleaners. It is to remove mineral deposits from the Water Tank. It is NOT to be used on the floor as a cleaning agent. DO NOT use this solution for anything than waht is described here.

www. H A A N USA . com

Mineral Deposits:

One problem with a steamer appliance is the mineral deposits caused by the high mineral content in many municipal water supplies. Mineral residue inside of the unit’s internal pipes and heater can cause intermittent steaming or, in some cases, no steam at all.

To reduce or eliminate the occurrence of mineral deposits, we recommend the use of de-mineralized or distilled water in the unit. However, regular tap water may be used.

If regular tap water is used, we recommend the use of the HAAN® Fresh Rinse Lime & Scale Remover’ every 2 or 3 months to ensure optimum functionality from your HAAN® Duo™ Steam Sweeper and Floor Sanitizer. You can purchase this directly from the HAAN® web site (see listing below).

How to use the Fresh RinseLime & Scale Remover:

1)Pour 1 cup of water (8 oz.) into the Water Tank.

2)Add the Fresh Rinse™ to the Water Tank.

3)Lift the unit and gently shake the Water Tank to dissolve the remover. Allow the solution to sit for approximately five (5) minutes. This will allow the solution to loosen any mineral deposits.

4)Empty the tank of the solution, and rinse tank with clean water.

5)Use the Fresh Rinse™ every 2-3 months to ensure optimum functionality from your Duo™.

in case of contact with eyes or skin: Hold eye open and rinse with copious amounts of cool water for 15-20 minutes. Remove contact lenses, if applicable; after first 15 minutes continue rinsing. Wash skin with soap and lots of water. Call a Poison Control Center or your physician for treatment advice.

IN CASE OF INGESTION: If swallowed, do not induce vomiting; if person is conscious, wash out mouth with water. Drink a glass of water followed with milk. Call a physician immediately.

If inhaled: Remove to fresh air; if not breathing, give artificial respiration, and if breathing is still difficult, give oxygen.

877 - HAAN DIRECT / 877 - 422 - 6347

pg 17

Page 20
Image 20
Haan HD-50 user manual Care & Maintenance cont, Mineral Deposits, How to use the Fresh Rinse Lime & Scale Remover