Assembling Your Duo™ Steam Sweeper & Floor Sanitizer
3 Attach the assembled ergonomic pole to the main body by aligning the ridge in the pole to the ridge in the base, as well as aligning the hole in the pole base with the Locking Pin. Push the Locking Pin in, and slide the pole down until the pin clicks into place and secures the pole.
Locking Pin
Ridge in polein place to side, with Locking
Pin to the rear
Before Using Your HAAN® Duo™:
HELPFUL HAAN® HINT:
DO NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance, except those authorized by HAAN®. While it is acceptable to use regular tap water, if the tap water in your area is hard, we recommend you use distilled/purified water to extend the life of your appliance.
Always empty water from water tank after use. For safety purposes, be sure to remove the Collection Bin before turning the unit upside down to empty the water tank. Replace bin afterwards.
www. H A A N USA . com
CAUTION
Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an ordinary extension cord. To provide continued protection against the risk of electric shock, connect to properly grounded outlet only.
Always be sure that your Steam Sweeper & Floor Sanitizer is UNPLUGGED from the wall receptacle prior to filling the water tank.
Never use your Duo™ on hard floor surfaces without attaching the
IMPORTANT: This product is NOT to be used for space heating purposes.
877 - HAAN DIRECT / 877 - 422 - 6347 | pg 7 |
