5 Use the operation button
aDescription of operation button
Connection between the water inlet hose and the washer
Indicator mode and meaning
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
Child lock function
The function is intended for children safety and preventing the washing program from accidental changes by children.
Push and hold the waterlevel button and spin button, then push down the power on/off button .The digitron displays C L .You can continue setting desired washing procedures. After setting ,push down the start/pause button. The child lock function is activated. all of the buttons are locked and cannot make selection .
Release the child lock function :push down water level button and spin button at the same timefor more 2seconds .After a beep sound ,the child lock function is released.
1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our
2 .Put the nut of the water inlet hose on the valve jointer.
3 .Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water 
inlet hose
"START/PAUSE" button
After the power is switched on, press it to start the machine
During working, push it to pause. 
During pause, push this button to restart and go on working
Soak
Wash
Rinse
Spin
Wash/spin speed
4
jointer of the | water absorption |
water inlet valve | cushion. |
Connection between the jointer of the water inlet hose and the water inlet hose
START |
|
PAU |
|
SE | SOAK |
|
2
Overflow
WASH |
| SPIN |
SPEED | RINSE | |
| SPEED | |
|
|
1.Push down the slider. Insert the water inlet hose into the jointer. |
|
|
|
|
|
| the jointer of the |
|
|
|
|
|
| ||
|
|
|
|
|
|
| water inlet hose |
| Locking level |
|
| ||||
|
|
|
| Slider | |||
2 Hang the lock lever to the jointer. Release the slider till a click |
|
|
|
|
|
| |
|
|
|
|
|
| ||
sound is heard.
Check the connection between the jointer of the water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain.
"SOAK "button
Press the Soak button to select a soak procedure.
The button can be used to select the desired soak time( 10, 20 minutes) from the Normal and Comforter programs.
The button is unavailable from the Saving,Speedily, Standard, Woollen, Carpet and Delicate programs.
"WASH/SPEED " button
Press the Wash button to select a wash procedure .
The button can be used to select the desired wash time( 0,6,9,12,15 minutes) from the Normal and Comforter program.
The button is unavailable from the Saving,Speedily, Standard, Woollen, Carpet and Delicate programs.
For a pause during operation or an initial operation, press the button for 2 seconds to start wash speed selection. The Wash indicator lamp is on and the speed from 1 to 4 is available for selection. The default value is 2. After restart, the machine is back to wash selection.
Press the button for 2 seconds. There is a buzz that indicates the speed selection is complete. Then the wash cycle can be selected.
"RINSE" button
Press the Rinse button to select a rinse procedure.
The button can be used to select the desired number of rinse cycles, (0, 1, 2 , 3 times )from the Normal program or the Comforter program. While the "Overflow" digitron is lighting,the program of the overflow rinse has been selected.
The button is unavailable from the Saving,Speedily, Standard, Woollen, Carpet and Delicate programs.
For the Normal program, the Water Saving mode is selected automatically. If the button is pressed before operation, it will change to Water Filling mode.
"SPIN/SPEED " button
Press the Spin/Speed button to
select a spin procedure.
The button can be used to select
the desired spin time(1,3,5,7 minutes )from the Normal program or the Comforter program.
The button is unavailable from the Saving,Speedily, Standard, Woollen, Carpet and Delicate programs.
For a pause during operation or an initial operation, press the button for 2 seconds to start spin speed selection. The Spin indicator lamp is on and the speed from 1 to 4 is available for selection. The default value is 2. After restart, the machine is back to spin selection.
Press the button for 2 seconds. There is a buzz that indicates the speed selection is complete.
Then the spin cycle can be selected.
Note: No speed selection from the Woollen, Carpet and Delicater programs.
4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet hose.
If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.
Locking level 
Slider
