Haier HWM70-A user manual Safety precautions

Models: HWM70-A

1 20
Download 20 pages 47.83 Kb
Page 3
Image 3

Safety precautions

Before using

Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase three pins receptacle. The earthing terminal must be earthed reliably.If possible,please adopt electric leakage protector.

Earth

In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hand. Be sure to pull the plug off and close the water faucet in following cases: power failure, delivering the machine, setting the machine idle or c l e a n i n g t h e m a c h i n e . D o n o t p l u g or pull the power plug with wet hand.

Do not bend, stretch, twist, bind the power cord by force,

or reform it. Do not press or clamp it with heavy items. If the power cord and power plug are bad, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent, or the after-sale service department for the sake of avoiding any risk. Keep the prong of the power plug clean. If dust is found on the power plug, please wipe it off with dry cloth.

In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole with carpet.

The ventilation holes at the bottom

Do not use water with temperature higher than 50 inside the tub.

Do not set the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel coating.

Do not wash water-proof laundries like the raincoat, bike covers, down textiles etc. to avoid abnormal vibrations in spinning and damaging the laundries.

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use it any more.

Page 3
Image 3
Haier HWM70-A user manual Safety precautions