5 Use the operation buttons
Connection between the water inlet hose and the washer
aDescription of operation button
1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our
nut of the water inlet hose
Indicator mode and meaning
Off:
Flashing: indicate the running program
On: indicate the program about to run, or indicate the selected mode
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
jointer of the water inlet valve
water absorption cushion.
Program 
STANDARD
SOAK
HEAVY
GENTLE
SAVE
COTTON
SINGLE WASH
RINSE
SPIN
SINGLE SPIN
TUB CLEAN
AIR DRY
INDICATION OF PROCESS (NO CHOOSING)
SOAK
WASH
RINSE SPIN
START
PAUSE
TIME REMAINED
RESERVE
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer. |
|
|
|
|
|
|
| the jointer of the |
|
|
|
|
|
|
| water inlet hose | |
2 Hang the lock lever to the jointer. Release the slider till a click | Locking level |
|
|
|
|
| Slider | |
|
|
|
|
|
|
|
| |
sound is heard. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Check the connection between the jointer of the water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.
START/PAUSE button
After the power is switched on,press it to start the machine
During working,push it to pause.
During pause,push this button to restart and go on working
Attention:
1.The digitron displays the remained time and process alternately during the washing machine working.
2.The process function is not selected solely .(see to Page 12)
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then pull of the water inlet hose.
If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.
Locking level 
Slider
