JVC HR-J430KR manual Tape Position Indicator, Next-Function Memory

20

PLAYBACKANDRECORDINGFEATURES(cont.)

POWER	MENU	SHUTTLE
		6
		q

°5

PLAY

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search or Instant			+	+	+
ReView. The position of "	" in	B					E
relation to "B" (Beginning) or "E"
(End) shows you where you are on				COUNT		0:33:27
the tape.

NOTE:

SUPERIMPOSE must be set to ON, or the indicator will not appear (☞ pg. 17).

POWER

1	2	3
4	5	6
7	8	9
	0	TIMER
	PLAY

FF

REW

C.MEMORY

Next-Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding.

*Before continuing, ensure that the VCR is in stop mode. a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press TIMER within 2 seconds.

NOTES:

●To do the above using the VCR's controls:

During Stop, turn the SHUTTLE all the way to the left and release it instead of pressing REW, and then press PLAY or POWER within 2 seconds.

●If you want the "next function" to automatically start when the counter reads "0H 00M 00S" (instead of at the beginning of the tape), press C. MEMORY so that the counter memory indicator appears on the front display panel before pressing REW.