JVC HR-J430KR manual Access Auto SP/EP, Place the arrow next to Auto SP/EP Timer by

OK

6

q

°5

CH

1 2 3

4 5 6

7 8 9

0

CH

OK

MENU

PUSH JOG

NOTES:

● If you have programmed the VCR to timer-record 2 or more programs, the second program and those thereafter may not fit on the tape if you set the Auto SP/EP Timer mode to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.

● There may be some noise at the point on the tape where the VCR switches from SP to EP mode.

● The Auto SP/EP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly with any tapes other than the following: T-30, T-60, T-90, and T-120.

31

Auto SP/EP Timer

If, when recording in SP mode, there is not enough tape to record the entire program, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a program of more than 2 hours in length.

For Example . . .

Recording a program of 140 minutes in length onto a 120- minute tape

Approximately 110 minutes	Approximately 30 minutes
SP mode	EP mode

Total 140 minutes

Make sure you select “ON” at the Auto SP/EP Timer screen before performing timer programming.

		ACCESS MAIN MENU
1		SCREEN
		Press MENU as many times as necessary.
		ACCESS FUNCTION SET
2		SCREEN
		Place the arrow next to "FUNCTION SET" by pressing
		CH5° or PUSH JOG5°, then press OK.
		ACCESS AUTO SP/EP
3		TIMER SCREEN
		Place the arrow next to “AUTO SP/EP TIMER” by
		pressing CH5° or PUSH JOG5°, then press OK.
4		SELECT MODE
		Place the arrow next to			AUTO SP/EP TIMER
		your choice (“ON” or
		“OFF”) by press CH5		or	=ON
	PUSH JOG5°.		°		OFF
					PRESS (5,°) TO SELECT
					PRESS (MENU) TO END
		RETURN TO NORMAL
5		SCREEN
		Press MENU as many times as necessary.