JVC HR-J430KR Edit To Or From Another, Load Cassettes, SET RECORDER’S Input Mode, Player Your VCR

Edit To Or

From Another

VCR

Player Your VCR

VIDEO OUT AUDIO OUT

VIDEO IN AUDIO IN

Recorder Another VCR

POWER

A/B CODE

1	2	3
4	5	6
7	8	9
NUMBER "0"	0

35

You can use your VCR as the player or the recorder.

MAKE CONNECTIONS

1 Connect an AV cable between the player’s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors.

● When connecting to a Hi-Fi VCR, connect your VCR's AUDIO IN/OUT connector to the AUDIO L IN/OUT connector on the Hi-Fi VCR.

LOAD CASSETTES

2 Insert the playback cassette into the player and the cassette to be recorded on into the recorder.

SET RECORDER’S INPUT

MODE

3 Set to AUX. With this VCR, press NUMBER key “0” (AU appears on the front display panel in place of a channel number).

START PLAYER

4 Set to its play mode.

START RECORDER

5 Set to its record mode.

NOTE:

Connections made to the front panel AUDIO/VIDEO input connectors automatically override those made to the rear panel AUDIO/VIDEO input connectors.

Control Two JVC VCRs

The supplied remote control is capable of controlling two JVC VCRs independently using the A/B CODE switch. You can set this VCR so it responds to remote commands only when the switch is set to B, and another VCR so it responds to commands when the switch is set to A. The switch is preset to A because this VCR normally responds to A-code signals. You can easily modify this VCR to accept B-code commands.

1Unplug the VCR’s power cord from the AC outlet.

2Set the A/B CODE switch on the remote control to B. 3Plug the VCR’s power cord back into the AC outlet.

4Turn the VCR’s power back on by pressing POWER on the remote.

The VCR will now respond only to B-code commands.