Haier HWM75-7288 user manual Use the operation buttons, Soak

Use the operation buttons

Off	￿ Push the On/Off button to switch on the
On: indicate the program about to run,or indicate	power.
	￿ When the power is on, push it again to
the selected mode or indicate the water level
	switch off the power. Push the
Flashing: indicate the running program
	On/Off button to switch on the power.
	￿ If the start/pause button is not pushed, the
	washing machine will automatically switch
￿ It displays “--” during detecting.	off the power after 5 minutes.
￿ It displays total remained time during the

running program (min).

￿It displays l remained reserved time during

reserve program hour

￿	It displays abnormal symbol in abnormal	After the power is switched on,press it to start
		the machine.
	situation.(See to Page 11)
		￿ During working, push it to pause.
		￿ During pause, push this button to restart
		and go on working

￿The digitron displays the time remained

(in minute) before the washing is fi nished. ￿ Push down the reserve button. The reserve

indicator light is on the digitron displays the reserve time of fi nishing washing (in hour).

￿ When the machine is started, the reserve

indicator light is on, indicating that the reserve function is running.

￿ The washing machine can detect the
laundries automatically during After
detection, it will set the water level to
suitable value among 30L 40L 50L	Program	Applicable situation
automatically.during the STANDARD	SOAK	Washing the relatively big thick or very
program.
		dirty laundries
￿ You can also set water level by yourself.
	STANDARD	Common washing
After the machine is started, it will not set
water level automatically. You shall push		If “STANDARD” program is set, the
the start/pause button to make new setting.		machine will execute fuzzy detection. The
￿ If there’s water inside the tub, the machine		computer will set the water level and wash
		time as per the cloth and quantity of the
cannot detect the laundries and will display
		laundries. The whole procedure is under
water level 40L .If wet laundries are put in,
it may display water level 50L. You must		automatic control.
set suitable water level by yourself.	SOFT	Washing the woollen textiles
￿ If quick program is selected, it will display	QUICK	Posthaste wash of the laundry under 2.0
water level 24L		kg with light soil.
￿ If tub dry program is selected, the water		The water level will automatically set 24L .
level will not respond	WASH	Just run the washing cycle without
￿ During operation of wash and rinse		drainage cycle. The detergent was left
program, you can push down the water		inside the drum and can be recycled.
level button to add water. When you	RINSE	Remove the left detergent from the clothes
release the button, or it reaches the		and then rinse the clothes
overfl ow water level, the machine will stop	SPIN	When the clothes are washed or the
adding water.		clothes are quite wet, extra spin is needed.
￿ The water level decided may be different	TUB DRY	The purpose is drying the inner tub and
from actual value because of the different
		the outer tub, which can avoid growing
moisture level of the laundries.

11