Safety precautions

Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably. If possible, please adopt electric leakage protector.

When the machine is normally using, please put the power plug at the location easily to be inserted and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle.

Do not bend ,extend, twist, bind by force. Do not press or nip it with weight. Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully.

If the power cord or the power plug is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department.

Do not put the machine at damp

 

place like the bathroom . Never wash

Do not use water hotter than 50 C .

it with water. Do not place wet laundries

 

on the control panel.

 

In case the washing

machine is installed

Do not wash water-proof laundries like

on ground

with

carpet , do not block the

the raincoat, bike covers etc, to avoid

ventilation

hole

with

carpet.

abnormal vibrations in spinning.

 

 

 

 

Ventilation hole at the bottom of the washing machine

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

2

Page 4
Image 4
Haier HWM80-0626S user manual Safety precautions