How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation |
|
position of the drain hose. | Back |
Extend the drain hose from the side of spin tub |
|
Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Dismantle the drain hose fixing clamp and take the hose out of the fixing groove.
(See to Figure 2).
Front
Figure 1
Soft item
Figure 2
Embed the drain hose into the groove along the side of the spin tub in the order of 1 ~ 3 , heading for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.
Extend to the spin tub side
Fig ure 3
Install the water inlet hose; Select the water level
Insert the water inlet hose into the water-filling
entrance on the control panel 
To dismantle the water inlet pipe, just push the control handle as indicated in the figure and pull it out 
Select water level according to the quantity of the laundries.
Set the water level adjusting lever to needed line.
Water inlet 
hose
Maximum
Water level indicator
Max
Medium Med Minimum Min
5
