RMC 7182

1U Rackmount System

Rack Precautions

o Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them.

o In a single rack installation, stabilizers should be attached to the rack.

o In multiple rack installations, the racks should be coupled together.

o Always make sure the rack is stable before extending a component from the rack.

o You should extend only one component at a time - extending two or more si- multaneously may cause the rack to become unstable.

Server Precautions

o Review the electrical and general safety precautions in Chapter 4.

o Determine the placement of each component in the rack before you install the rails.

o Install the heaviest server components on the bottom of the rack first, and then work up.

o Use a regulating uninterruptible power supply (UPS) to protect the server from power surges, voltage spikes and to keep your system operating in case of a power failure.

o Allow the power supply units and hot plug Serial ATA drives to cool before touching them.

o Always keep the rack's front door and all panels and components on the servers closed when not servicing to maintain proper cooling.

 

© Copyright 2005 Acnodes, Inc.

661 Brea Canyon Rd., Suite 3

All rights reserved. Product description and product specifications

Walnut, CA 91789

are subject to change without notice. For latest product information,

tel: 909.598.7388, fax: 909.598.0218

please visit Acnodes’ web site at www.acnodes.com.

Page 16
Image 16
Acnodes RMC 7182 user manual Rack Precautions, Server Precautions