Acnodes RMC 7182 Server Chassis Features, System Power, Sata Subsystem, Control Panel, Backplane

RMC 7182

1U Rackmount System

1-3 Server Chassis Features

The following is a general outline of the main features of the RMC7182 chassis.

System Power

When configured as a Acnodes RMC7182, the embedded system chassis includes a single 560W power supply.

SATA Subsystem

For the RMC7182, the motherboard chassis was designed to support four SAS or SATA hard drives, which are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot- swap capability of the SAS drives (there is no system support for SATA drives).

Control Panel

The embedded system's control panel provides important system monitoring and control information. LEDs indicate power on, network activity, hard disk drive activ- ity and system overheat conditions. The control panel also includes a main power button and a system reset button. The front of the chas- sis also includes a COM port and two USB serial ports for easy access.

I/O Backplane

The SC113MTS-560C is a short-depth, 1U rackmount chassis. Its I/O backplane provides three PCI slots, one COM port (the other is internal), one VGA port, two USB ports, PS/2 mouse and keyboard ports, two Ethernet (LAN) ports and a UID LED.

Cooling System

The embedded system chassis' revolutionary cooling design has been optimized to provide sufficient cooling for dual CPU configurations. The chassis includes four

4-cm counter-rotating PWM (Pulse Width Modulated) fans located in the middle of the system. There is a "Fan Speed Control Mode" in BIOS that allows chassis fan speed to be determined by system temperature.

	© Copyright 2005 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.