RMC 7182

1U Rackmount System

2-5 Checking the Motherboard Setup

After you install the server in the rack, you will need to open the unit to make sure the serverboard is prop- erly installed and all the connections have been made.

Removing the Chassis Cover (Figure 2-7)

1.Grasp the two handles on either side and pull the unit straight out until it locks (you will hear a "click").

2.Remove the screws securing the top cover to the chssis.

3.Slide the cover toward the rear of the chassis.

4.Lift the cover off the chassis.

Checking the Components

1.You may have a processor already installed into the serverboard. The proces- sor needs its own heatsink. See Chapter 5 for instructions on processor and heatsink installation.

 

© Copyright 2005 Acnodes, Inc.

661 Brea Canyon Rd., Suite 3

All rights reserved. Product description and product specifications

Walnut, CA 91789

are subject to change without notice. For latest product information,

tel: 909.598.7388, fax: 909.598.0218

please visit Acnodes’ web site at www.acnodes.com.

Page 24
Image 24
Acnodes RMC 7182 user manual Checking the Motherboard Setup, Removing the Chassis Cover Figure, Checking the Components