NMI Button, Fan Headers, Serial Ports | Acnodes RMC 7182 guide

RMC 7182

1U Rackmount System

NMI Button

The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin definitions.

Fan Headers

There are six fan headers on the serverboard, all of which are 4-pin fans (pins 1-3 are backward compat- ible with traditional 3-pin fans). See the table on the right for pin defini- tions. The onboard fan speeds are controlled by Thermal Management (via Hardware Monitoring) under the Advanced Section in the BIOS. The default is disabled. Please use all 3-pin fans or all 4-pin fans.

ATX PS/2 Keyboard and PS/2

Mouse Ports

The ATX PS/2 keyboard and the PS/2 mouse are located beside the USB0/1 ports. The mouse port is above the keyboard port. See the table on the right for pin definitions.

Serial Ports

Two serial ports are included on the serverboard. COM1 is a backpanel port and COM2 is a header located on the corner of the board near USB2. See the table on the right for pin definitions.

	© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.

Image 49

Acnodes RMC 7182 user manual NMI Button, Fan Headers, ATX PS/2 Keyboard and PS/2 Mouse Ports, Serial Ports

Contents

RMC Copyright 2005 Acnodes, Inc Manual Organization Preface Advanced Chassis Setup Advanced Motherboard SetupBios Table of Contents System Interface Installing the System in to a Rack Advanced Motherboard Setup NIC2 JLAN2 LED NIC1 JLAN1 LED Advanced Chassis Setup Bios Overview Introduction Other Features Motherboard FeaturesProcessor Memory RMC System Power Server Chassis FeaturesSata Subsystem Control Panel Preparing for Setup Choosing a Setup LocationOverview Unpacking the System Server Precautions Rack Precautions Rack Mounting Considerations Identifying the Sections of the Rack Rails Installing the System into a Rack Inner Rails Installing the Rack Rails Outer Rails RMC Installing the Chassis into a Rack Installing the Server into a Telco Rack Removing the Chassis Cover Figure Checking the Motherboard SetupChecking the Components Providing Power Checking the Drive Bay SetupChecking the Drives Checking the Airflow Power Reset ButtonControl Panel Buttons Universal Information LED Control Panel LEDs NIC2 Drive Carrier LEDs Electrical Safety Precautions System Safety General Safety Precautions ESD Precautions Operating Precautions Handling the Motherboard Precautions Installing to the Chassis Serverboard InstallationUnpacking Connecting Data Cables Connecting CablesConnecting Power Cables Connecting the Control Panel I/O Ports Installing an LGA1366 Processor Installing the Processor and Heatsink RMC Installing a Passive CPU Heatsink Removing the Heatsink Installing & Removing DIMMs Installing Memory Modules Maximum Memory Possible Memory Support PCI Expansion Cards Installing a PCI Expansion Card Serverboard Details RMC Main ATX Power Supply Connector Connector DefinitionsProcessor Power Connector Power Button Power On LED HDD LED/UID SwitchOverheat/Fan Fail/UID LED Fan Headers NMI ButtonATX PS/2 Keyboard and PS/2 Mouse Ports Serial Ports Wake-On-LAN Chassis IntrusionExternal Speaker/Internal Buzzer Overheat/Fan Fail LED Power Supply SMBus Connector Onboard Power LEDUniversal Serial Bus USB Sgpio Headers Alarm Reset Power Supply Fail LED HeaderButton Unit Identifier Button VGA Enable/Disable Jumper SettingsExplanation of Jumpers Cmos Clear Watch Dog Enable/Disable LAN1/2 Enable/DisableUSB Wake-Up SAS Enable/Disable BMC Enable/DisableSAS RAID Mode Select SMBus to PCI Slots Onboard Power LED LE1 Onboard IndicatorsLAN1/2 LEDs Ipmi Dedicated LAN LEDs SAS Activity LED BMC Heartbeat LEDSAS Heartbeat LED Sata and Floppy Drive Connections Floppy ConnectorSata Ports SAS Ports Driver/Tool Installation Display Screen Installing Software RMC RMC Tools Required Static-Sensitive Devices System Cooling Control Panel System Fan Failure Adding a System FanReplacing a System Fan Figure Accessing the Drive Bays Drive Bay Installation/RemovalHard Drive Installation Installing a Hard Drive into a Drive Carrier Figure Removing a Hard Drive Figure DVD Drive Installation Power Supply Failure Power Supply Removing/Replacing the Power Supply How To Change the Configuration Data Starting Bios Setup UtilityIntroduction Starting the Setup Utility Main Setup System Memory System Time/System Date Xboot Features Quick Boot Advanced Setup ConfigurationsQuiet Boot AddOn ROM Display Mode Power Button Function Wait For F1 If ErrorRestore on AC Power Loss PS/2 Mouse Support Hardware Prefetcher Available when supported by the CPU Ratio Cmos SettingXProcessor & Clock Options CPU Ratio Clock Spread Spectrum Intel Eist Technology Active Processor Cores Core Ratio Limit Intel Turbo Boost Configuration Turbo Ratio Limit Program~ 3 Core Ratio Limit TDC Limit Override XAdvanced Chipset Control Temperature Rise Memory ModeQPI L0s and L1 Memory Frequency Air Flow High Performance Event TimerAltitude Dimm Pitch Xide / Floppy Configuration LBA/Large Mode IDE Detect Timeout secType DMA Mode PIO ModeBlock Multi-Sector Transfer 32Bit Data Transfer A.R.T. For Hard disk drives XPCI/PnP Configuration XRemote Access Configuration XSuper IO Device Configuration XHardware Health Configuration CPU Temperature System Temperature Fan Speed Control Modes Xacpi ConfigurationFan1 ~ Fan 5 Reading USB Device WakeUp Acpi Version Features XTrusted Computing TCG/TPM Support Headless ModeExecute TPM Command TPM Enable/Disable Status Xipmi Configuration BMC Watch Dog Timer Action Set PEF Configuration BMC WatchDog TimeOut MinSec XEvent Log ConfigurationView Event Log Mark all events as read Supervisor Password Security SettingsUser Password Change Supervisor Password Boot Sector Virus Protection Change User Password XBoot Device Priority Boot SettingsXHard Disk Drives Exit Options Retry Boot DevicesXRemovable Drives Save Changes and Exit Load Fail-Safe Defaults Load Optimal DefaultsDiscard Changes and Exit Discard Changes Recoverable Post Error Beep Codes Appendix a Post Error Beep Codes Installing Windows on RAID Systems Appendix B Installing the Windows OS Installing Windows on Non-RAID Systems Chipset ProcessorsMemory Capacity SAS Controller Power Supply WeightChassis System Cooling