Acnodes RMC 7182 user manual Motherboard Features, Processor, Memory, Onboard SAS, Onboard Sata

RMC 7182

1U Rackmount System

1-2 Motherboard Features

The RMC7182 is a single processor motherboard based upon Intel's X58 chipset. Below are the main features of the RMC7182.

Processor

The RMC7182 supports single Intel® Core™ i7, Core™ i7 Extreme processors and future Intel Nehalem processor families (next generation Intel Xeon® processor). Please refer to the motherboard specifications pages on our web site for updates on supported processors.

Memory

The RMC7182 has six 240-pin DIMM slots that can support up to 24 GB of unbuf- fered ECC/non-ECC DDR2-1333/1066/800 SDRAM.

Onboard SAS

An onboard LSI 1068E SAS controller in integrated into the RMC7182. The hot-swap SAS drives are connected to a backplane that provides power, bus termination and configuration settings.

Note: The operating system you use must have R AID suppor t to enable the hot-swap capabil- ity and R AID function of the SAS drives. R AID 0, 1, 5 and 10 are supported. Refer to the following ftp site for setup guidelines.

Onboard SATA

A SATA controller is built in to the ICH10R portion of the chipset to provide support for a six port, 3 Gb/ sec Serial ATA subsystem. The SATA drives are hot-swappable units.

PCI Expansion Slots

The RMC7182 has one PCI-E 2.0 x16 slot for use in the motherserver. The PCI-E slot is populated with a riser card (included).

Onboard Controllers/Ports

An onboard IDE controller supports one floppy drive. Onboard I/O backpanel ports include one COM port, a VGA port, two USB ports, PS/2 mouse and keyboard ports and two Gigabit LAN (NIC) ports.

Other Features

Other onboard features that promote system health include voltage monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue.

	© Copyright 2005 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.