Xide / Floppy Configuration | Acnodes RMC 7182 instruction

RMC 7182

1U Rackmount System

Active State Power Management

Select Enabled to start Active-State Power Management for signal transactions between L0 and L1 Links on the PCI Express Bus. This maximizes power-saving and transaction speed. The options are Enabled and Disabled.

USB Functions

This feature allows the user to decide the number of onboard USB ports to be enabled. The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, and 8 USB ports.

USB 2.0 Controller

Select Enabled to activate the onboard USB 2.0 controller. The options are En- abled and Disabled.

Legacy USB Support

Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB support will be automatically enabled if a legacy USB device is installed on the motherboard, and vise versa. The settings are Disabled, Enabled and Auto.

XIDE / Floppy Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of the IDE Devices and displays the following items:

Floppy A

This feature allows the user to select the type of floppy drive connected to the sys- tem. The options are Disabled, 360KB 5 1/4", 1.2MB 5 1/4", 720KB 3 1/2", 1.44MB

3 1/2" and 2.88MB 3 1/2".

SATA#1 Configuration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se- lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled, Compatible, Enhanced.

Configure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are IDE, RAID and AHCI.

ICH RAID CodeBase (Available if RAID is selected above)

Select Intel to enable the Intel SATA Host RAID Utility. Select Adaptec to use the

Adaptec Host RAID Utility. The options are Intel and Adaptec.

	© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.

Image 81

Acnodes RMC 7182 user manual Xide / Floppy Configuration

Contents

RMC Copyright 2005 Acnodes, Inc Manual Organization Preface Advanced Motherboard Setup Advanced Chassis SetupBios Table of Contents System Interface Installing the System in to a Rack Advanced Motherboard Setup NIC2 JLAN2 LED NIC1 JLAN1 LED Advanced Chassis Setup Bios Overview Introduction Other Features Motherboard FeaturesProcessor Memory RMC System Power Server Chassis FeaturesSata Subsystem Control Panel Preparing for Setup Choosing a Setup LocationOverview Unpacking the System Server Precautions Rack Precautions Rack Mounting Considerations Identifying the Sections of the Rack Rails Installing the System into a Rack Inner Rails Installing the Rack Rails Outer Rails RMC Installing the Chassis into a Rack Installing the Server into a Telco Rack Checking the Motherboard Setup Removing the Chassis Cover FigureChecking the Components Providing Power Checking the Drive Bay SetupChecking the Drives Checking the Airflow Reset Button PowerControl Panel Buttons Universal Information LED Control Panel LEDs NIC2 Drive Carrier LEDs Electrical Safety Precautions System Safety General Safety Precautions ESD Precautions Operating Precautions Handling the Motherboard Precautions Serverboard Installation Installing to the ChassisUnpacking Connecting Data Cables Connecting CablesConnecting Power Cables Connecting the Control Panel I/O Ports Installing an LGA1366 Processor Installing the Processor and Heatsink RMC Installing a Passive CPU Heatsink Removing the Heatsink Installing & Removing DIMMs Installing Memory Modules Maximum Memory Possible Memory Support PCI Expansion Cards Installing a PCI Expansion Card Serverboard Details RMC Main ATX Power Supply Connector Connector DefinitionsProcessor Power Connector Power Button HDD LED/UID Switch Power On LEDOverheat/Fan Fail/UID LED Fan Headers NMI ButtonATX PS/2 Keyboard and PS/2 Mouse Ports Serial Ports Wake-On-LAN Chassis IntrusionExternal Speaker/Internal Buzzer Overheat/Fan Fail LED Power Supply SMBus Connector Onboard Power LEDUniversal Serial Bus USB Sgpio Headers Alarm Reset Power Supply Fail LED HeaderButton Unit Identifier Button VGA Enable/Disable Jumper SettingsExplanation of Jumpers Cmos Clear LAN1/2 Enable/Disable Watch Dog Enable/DisableUSB Wake-Up SAS Enable/Disable BMC Enable/DisableSAS RAID Mode Select SMBus to PCI Slots Onboard Power LED LE1 Onboard IndicatorsLAN1/2 LEDs Ipmi Dedicated LAN LEDs BMC Heartbeat LED SAS Activity LEDSAS Heartbeat LED Sata and Floppy Drive Connections Floppy ConnectorSata Ports SAS Ports Driver/Tool Installation Display Screen Installing Software RMC RMC Tools Required Static-Sensitive Devices System Cooling Control Panel Adding a System Fan System Fan FailureReplacing a System Fan Figure Accessing the Drive Bays Drive Bay Installation/RemovalHard Drive Installation Installing a Hard Drive into a Drive Carrier Figure Removing a Hard Drive Figure DVD Drive Installation Power Supply Failure Power Supply Removing/Replacing the Power Supply Starting Bios Setup Utility How To Change the Configuration DataIntroduction Starting the Setup Utility Main Setup System Memory System Time/System Date Xboot Features Quick Boot Advanced Setup ConfigurationsQuiet Boot AddOn ROM Display Mode Power Button Function Wait For F1 If ErrorRestore on AC Power Loss PS/2 Mouse Support Hardware Prefetcher Available when supported by the CPU Ratio Cmos SettingXProcessor & Clock Options CPU Ratio Clock Spread Spectrum Intel Eist Technology Active Processor Cores Core Ratio Limit Intel Turbo Boost Configuration Turbo Ratio Limit Program~ 3 Core Ratio Limit TDC Limit Override XAdvanced Chipset Control Temperature Rise Memory ModeQPI L0s and L1 Memory Frequency Air Flow High Performance Event TimerAltitude Dimm Pitch Xide / Floppy Configuration IDE Detect Timeout sec LBA/Large ModeType PIO Mode DMA ModeBlock Multi-Sector Transfer 32Bit Data Transfer A.R.T. For Hard disk drives XPCI/PnP Configuration XRemote Access Configuration XSuper IO Device Configuration XHardware Health Configuration CPU Temperature System Temperature Fan Speed Control Modes Xacpi ConfigurationFan1 ~ Fan 5 Reading USB Device WakeUp Acpi Version Features XTrusted Computing TCG/TPM Support Headless ModeExecute TPM Command TPM Enable/Disable Status Xipmi Configuration BMC Watch Dog Timer Action Set PEF Configuration BMC WatchDog TimeOut MinSec XEvent Log ConfigurationView Event Log Mark all events as read Supervisor Password Security SettingsUser Password Change Supervisor Password Boot Sector Virus Protection Change User Password Boot Settings XBoot Device PriorityXHard Disk Drives Exit Options Retry Boot DevicesXRemovable Drives Save Changes and Exit Load Fail-Safe Defaults Load Optimal DefaultsDiscard Changes and Exit Discard Changes Recoverable Post Error Beep Codes Appendix a Post Error Beep Codes Installing Windows on RAID Systems Appendix B Installing the Windows OS Installing Windows on Non-RAID Systems Chipset ProcessorsMemory Capacity SAS Controller Power Supply WeightChassis System Cooling