PS/2 Mouse Support, Wait For F1 If Error | Acnodes RMC 7182 guide

RMC 7182

1U Rackmount System

PS/2 Mouse Support

This feature enables support for the PS/2 mouse. The options are Disabled, Enabled and Auto.

Wait For 'F1' If Error

This forces the system to wait until the 'F1' key is pressed if an error occurs. The options are Dis- abled and Enabled.

Hit 'Del' Message Display

This feature displays "Press DEL to run Setup" during POST. The options are Enabled and Dis- abled.

Watch Dog Function

If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive for more than 5 minutes. The options are Enabled and Disabled.

Power Button Function

This setting allows you to decide if the power button will turn off the system in- stantly or wait for 4 seconds when it is pressed. The options are Instant Off and 4 Seconds Override.

Restore on AC Power Loss

Use this feature to set the power state after a power outage. Select Power-Off for the system power to remain off after a power loss. Select Power-On for the system power to be turned on after a power loss. Select Last State to allow the system to resume its last state before a power loss. The options are Power-On, Power-Off and Last State.

Interrupt 19 Capture

Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to En- abled, the ROM BIOS of the host adaptors will "capture" Interrupt

19 at boot and allow the drives that are attached to these host adaptors to function as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap- tors will not capture Interrupt 19, and the drives attached to these adaptors will not function as bootable devices. The options are Enabled and Disabled.

	© Copyright 2005 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.

Image 74

Acnodes RMC 7182 user manual PS/2 Mouse Support, Wait For F1 If Error, Hit Del Message Display, Watch Dog Function

Contents

RMC Copyright 2005 Acnodes, Inc Preface Manual Organization Bios Advanced Motherboard SetupAdvanced Chassis Setup Table of Contents Installing the System in to a Rack System Interface Advanced Motherboard Setup NIC2 JLAN2 LED NIC1 JLAN1 LED Advanced Chassis Setup Bios Introduction Overview Processor Motherboard FeaturesOther Features Memory RMC Sata Subsystem Server Chassis FeaturesSystem Power Control Panel Overview Choosing a Setup LocationPreparing for Setup Unpacking the System Rack Precautions Server Precautions Rack Mounting Considerations Installing the System into a Rack Identifying the Sections of the Rack Rails Installing the Rack Rails Inner Rails Outer Rails RMC Installing the Chassis into a Rack Installing the Server into a Telco Rack Checking the Components Checking the Motherboard SetupRemoving the Chassis Cover Figure Checking the Drives Checking the Drive Bay SetupProviding Power Checking the Airflow Control Panel Buttons Reset ButtonPower Control Panel LEDs Universal Information LED NIC2 Drive Carrier LEDs System Safety Electrical Safety Precautions General Safety Precautions ESD Precautions Operating Precautions Precautions Handling the Motherboard Unpacking Serverboard InstallationInstalling to the Chassis Connecting Power Cables Connecting CablesConnecting Data Cables Connecting the Control Panel I/O Ports Installing the Processor and Heatsink Installing an LGA1366 Processor RMC Installing a Passive CPU Heatsink Removing the Heatsink Installing Memory Modules Installing & Removing DIMMs Memory Support Maximum Memory Possible Installing a PCI Expansion Card PCI Expansion Cards Serverboard Details RMC Processor Power Connector Connector DefinitionsMain ATX Power Supply Connector Power Button Overheat/Fan Fail/UID LED HDD LED/UID SwitchPower On LED ATX PS/2 Keyboard and PS/2 Mouse Ports NMI ButtonFan Headers Serial Ports External Speaker/Internal Buzzer Chassis IntrusionWake-On-LAN Overheat/Fan Fail LED Universal Serial Bus USB Onboard Power LEDPower Supply SMBus Connector Sgpio Headers Button Power Supply Fail LED HeaderAlarm Reset Unit Identifier Button Explanation of Jumpers Jumper SettingsVGA Enable/Disable Cmos Clear USB Wake-Up LAN1/2 Enable/DisableWatch Dog Enable/Disable SAS RAID Mode Select BMC Enable/DisableSAS Enable/Disable SMBus to PCI Slots LAN1/2 LEDs Onboard IndicatorsOnboard Power LED LE1 Ipmi Dedicated LAN LEDs SAS Heartbeat LED BMC Heartbeat LEDSAS Activity LED Sata Ports Floppy ConnectorSata and Floppy Drive Connections SAS Ports Installing Software Driver/Tool Installation Display Screen RMC RMC Static-Sensitive Devices Tools Required Control Panel System Cooling Replacing a System Fan Figure Adding a System FanSystem Fan Failure Hard Drive Installation Drive Bay Installation/RemovalAccessing the Drive Bays Installing a Hard Drive into a Drive Carrier Figure Removing a Hard Drive Figure DVD Drive Installation Power Supply Power Supply Failure Removing/Replacing the Power Supply Introduction Starting Bios Setup UtilityHow To Change the Configuration Data Main Setup Starting the Setup Utility System Time/System Date System Memory Quiet Boot Advanced Setup ConfigurationsXboot Features Quick Boot AddOn ROM Display Mode Restore on AC Power Loss Wait For F1 If ErrorPower Button Function PS/2 Mouse Support XProcessor & Clock Options CPU Ratio Ratio Cmos SettingHardware Prefetcher Available when supported by the CPU Clock Spread Spectrum Active Processor Cores Intel Eist Technology ~ 3 Core Ratio Limit Intel Turbo Boost Configuration Turbo Ratio Limit ProgramCore Ratio Limit TDC Limit Override XAdvanced Chipset Control QPI L0s and L1 Memory ModeTemperature Rise Memory Frequency Altitude High Performance Event TimerAir Flow Dimm Pitch Xide / Floppy Configuration Type IDE Detect Timeout secLBA/Large Mode Block Multi-Sector Transfer PIO ModeDMA Mode A.R.T. For Hard disk drives 32Bit Data Transfer XPCI/PnP Configuration XSuper IO Device Configuration XRemote Access Configuration XHardware Health Configuration System Temperature CPU Temperature Fan1 ~ Fan 5 Reading Xacpi ConfigurationFan Speed Control Modes USB Device WakeUp Execute TPM Command Headless ModeAcpi Version Features XTrusted Computing TCG/TPM Support TPM Enable/Disable Status Xipmi Configuration Set PEF Configuration BMC Watch Dog Timer Action View Event Log XEvent Log ConfigurationBMC WatchDog TimeOut MinSec Mark all events as read User Password Security SettingsSupervisor Password Change Supervisor Password Change User Password Boot Sector Virus Protection XHard Disk Drives Boot SettingsXBoot Device Priority XRemovable Drives Retry Boot DevicesExit Options Save Changes and Exit Discard Changes and Exit Load Optimal DefaultsLoad Fail-Safe Defaults Discard Changes Appendix a Post Error Beep Codes Recoverable Post Error Beep Codes Appendix B Installing the Windows OS Installing Windows on RAID Systems Installing Windows on Non-RAID Systems Memory Capacity ProcessorsChipset SAS Controller Chassis WeightPower Supply System Cooling