Haier HWM80-828A Use the operation button, Description of operation button, Power button

How to change the direction of the drain hose

5 Use the operation button

Description of operation button

REMAIN(MINUTES)

20

POWER

ON/OFF

1.Lean the machine down gently with the front

surface facing the ground. as indicated in Figure 1

2.Dismantle the rear cover of the washing machine.

as indicated in Figure 2

3.Pinch the mouth of drain pipe and take off the pipe hook.

4.Put your hand into the machine and loosen the clip of drain pipe support then pull inside the pipe and fetch out from the other side and set it on the clip, as indicated in Figure 3.

5.Install Hook of fixing the drain hose and bottom

cover then lift the machine up gently.

FIRST RINSE	40	15		3	9	7	8	COMMON
SECOND RINSE	30			2	7	5	6	BLANKET
THIRD RINSE	20	10		1	5	3	4	CHILD
	10	5	RESERVER(HOURS)		3	1	2	SPEEDY
				OVERFLOW
RESERVE	AIR DRY
WATER		WASH	DELAY	RINSE	SPIN		WATER
	SOAK
							LEVEL

STANDARD

MEMORY

WOOLSTART

SILKPAUSE

Unhinge clamp outlet

Indicator mode and meaning

Off

Flashing, indicating the running program

On, indicating the program about to run or the selection mode

Child lock function

Figure 1 Figure 2 Figure 3

Remarks: in order to make sure of the correct of installation, it is suggested to change the direction of the drain hose with our company serviceman .

The function is intended for children safety and preventing the washing program from accidental changes by children.

Push and hold the water level button and spin button, then push down the power on/off button .

You can continue setting desired washing procedures. After setting ,push down the start/pause button. The child lock function is activated. all of the buttons are locked and cannot make selection .

Release the child lock function :push down water level button and spin button at the same time for more 2seconds . After a beep sound ,the child lock function is released.

	A "POWER" button
	Push the "POWER" button to switch on the power.
POWER	Under power-on mode, push it to switch off the power.
ON/OFF
	Push the "POWER" button to switch on the power. If the "START/PAUSE" button is not pushed, the machine will
	switch off the power automatically after 5 minutes.
	B "START/PAUSE" button
START
	After the power is switched on, press it to start the machine
PAUSE
	During working, push it to pause.
	During pause, push this button to restart		and go on working
	C "PROGRAM" button
	Program	Application	Program	Application
	COMMON	Washing the common laundries	STANDARD	Standard saving washing for normal laundries
				The commom wash , the washing machine
PROGRAM	BLANKET	Washing the relatively big and thick laundries	MEMORY	will set to MEMORY program including
				"wash, rinse,spin,water value "automatically
				last time
	JEAN	Washing the relatively big and thick laundries	WOOL	Washing for the woollen laundries, under 2.5kg
	SPEEDY	Quick washing for normal laundries	SILK	Washing the silk laundries

6 11