Haier HWM80-828A Adjust the Installation position, Usage the drain hose, Water LEVELbutton

WASH

"WASH " button

Press the Wash button to select a wash time, from the MEMORY,BLANKET, CHILD ,SPEEDY, STANDARD programs.

Adjust the Installation position

The largest allowable slope of the shank base of the machine is 2.The slanting or rough ground will result in

Press the Wash button can select or cancel the process of wash ,but can not change time from the SILK programs.

The button is unavailable from the SPEEDY and WOOL programs.

E "SPIN " button

Press the "SPIN "button to select spin time, from the MEMORY,BLANKET,JEAN,STANDARD program.

SPIN

The button is unavailable from the SPEEDY and WOOL programs.

unstable running or stoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal:

Hang the lead line to check if it is horizontal.

<2

Press "SPIN"buttoncan select or cancel the process of spin ,but can not change time from the SILK programs.

F "WATER LEVEL"button

Common, memory and standard procedures for washing machine automatically detects the amount of cloth,

Adjust the adjustable leg:

1 .To twist the adjustable leg, please first lift up the side of the leg slightly, loosen the adjustable nut, and twist the leg.

2 . After adjustment, fasten the nut.

the adjustable nut

Loosen Fasten the adjustable leg

High Low

	the water level is automatically set to 4.6.8 in an appropriate level. Into the wet clothing, may be set to "8" level,
	the user needs to choose the appropriate level.
WATER	Due to different levels of wet and dry cloth to determine the actual water level may be different;

Usage the drain hose

LEVEL	Washing machines began to work, to manually change the level, press the "start pause" button re-select.
	If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 .
	During the period of "washing" and "rinse", hold down the "water" button fill water, hand release or overflow water
	to stop when reached the water level.
	Wool, silk program level only can be choosen between 4-8 level, blanket water level of the program to
	select between 2-5
	In common, strong, children, standards, and the memory process, the rinse water when washing the water level
	higher than that of a file (the highest water level and artificial selection, except when rinse water)

	G "AIR DRY"button
AIR DRY	Push the "AIR DRY" button to select air dry procedure. The program is chosen(0.5h 1.0h 2.0h).
	0.5 1.0h The purpose is drying the inner tub and the outer tub, which can avoid growing
	mildew on the outer tub and the inner tub.

The drainage shall be smooth with the drain hose.

1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way.

2.Do not step on or press the drain hose.

<10cm

4.If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m.

> 30mm

<1.5m

2.0h can dry laundries The max drying capacity of the fibre laundrie is 2.0 kg.

"AIR DRY"program can not be reserved

	H "RINSE"button
	For the MEMORY,BLANKET,CHILD,STANDARD programs push the RINSE botton light is flashing ,
RINSE	then push select the rinse times Overflow rinse.1.2.3.
	For ECONOMY ,WOOL programs, press "RINSE"button can not change time

The button is unavailable from the SPEEDY and TUB DRY programs.

123

3. If the drain hose is too long, cut it at mid point.	5.If the extra hose is too long, cut it either at A
To make smooth drainage, cut the front end of
	or at B.
the hose slantingly.

A B

5