Haier HWM80-828A user manual Installation and adjustment, Install the bottom plate

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.

Install the inner cover component

1.Open the top lid of the washing machine.

2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove. 3.Firstly insert the inner cover shaft of one side into the corresponding outer tub

cover shaft groove, then push the another inner cover shaft into the corresponding outer tub cover shaft groove. Please install to designated position to guarantee there are no dropping or abnormal sound in opening and closing of the inner cover, and the operation shall be smooth. Do not dismount the inner cover component after washing.

Outer tub cover

Outer tub cover shaft groove	Right hand
Inner cover shaft	Left hand

Inner cover component

	I	"DELAY "	button
	Press the "DELAY" button, digital display the time of washing			appointment
	(by the hour display), LED starts blinking. In hours, an appointment can choose between 2-24 hours,
	for a long time press by "DELAY" button, the time of appointment can be continuously increased.
	Appointment process, press the "DELAY" button to display reservation status.
	J	"SOAK "	button
	For the MEMORY,BLANKET,JCHILD,STANDARD programs			push the SOAK botton to
SOAK		select the desired soak time( 10, 20,30,40 minutes)

The button is unavailable from the SPEEDY SILK and WOOL programs.

K Reserve, remain time digitron

It displays "--" during detecting.

It displays remained reserve time (hour).

It displays abnormal symbol in abnormal situation.(See to Page16)

Figure 1

Figure 2

L "RESERVE WATER " button

You can choose "RESERVE WATER" function to keep the after rinsing water.

Washing machine will keep the after rinsing water once finish rinsing in tub about 4 hours, and buzzer every 15

minutes.( For example, if you choose "SECOND RINSE", the machine only keep the after second rinsing water,

if you choose "FIRST RINSE" and "SECOND RINSE" together, the machine will keep the after first and second

Install the bottom plate

After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine, then lift the machine up gently. See to the figure:

Two claws at the bottom cover shall be inserted in two bar-shaped holes in the stand. Make sure the claws are firmly in place.

I

Back

Front
Soft items	Bottom plate

Section I enlarging

RESERVE	rinsing water)
WATER
	Press"START/PAUSE" button or open and close the top lid one time to collect the after rinsing water, then the
	machine will go on for next program.
	If you don't collect the after rinsing water within 4 hours, the machine will drain automaticly, then go on for
	next program.

Steps of using the operation buttons and description of the steps

1.Push "POWER" button to switch on the power

2.Push "PROGRAM/" button to select suitable full-auto program

After the power is switched on, "MEMORY" is automatically set. To select other full-auto program, please push the "PROGRAM" button till the corresponding indicator is on. Refer to the "PROGRAM" button on Page 10. E.g. Set to "SPEEDY"program for small quantity of laundries with light soil.

When a standard cycle is selected, the fuzzy program is run. The water level and the washing time can be selected according to be texture and volume of the laundry. The washing cycle is automatically controlled.

4 13